Arch Space/ru

Плоскость Сечения

Лестница

Архитектурный верстак "Arch"

Description

Применение

Once a space has been created, you can also add or remove boundaries to/from it using the Add or Remove buttons in the toolbar. Alternatively, you can also do this in the Tasks panel or in the Property editor.

As an example, to add a boundary, given a space that intersects a wall:

1. Select the wall face that intersects the space. That will be the new boundary.
2. Keeping the Ctrl key pressed, select the space.
3. Press the Add button in the toolbar.
4. The wall face now defines a new boundary, and the space will only extend up to the wall face in the direction facing it.

The same example: add a boundary, given a space that intersects a wall. This time we're using the Tasks panel:

1. Double-click the space object in the Tree View. This will activate its Tasks panel.
2. Select the wall face that intersects the space. That will be the new boundary.
3. Press the Add button in the Tasks panel. The name of the wall face will be displayed in the "Space boundaries" section there.
4. Press the OK button in the Tasks panel.
5. The wall face now defines a new boundary, and the space will only extend up to the wall face in the direction facing it.

Yet another alternative: add a boundary, given a space that intersects a wall. This time we're using the Property editor:

1. Navigate to the Property View and locate the ДанныеBoundaries property under the "Space" group.
2. On the right hand side of the ДанныеBoundaries property, click on the ellipsis button.
3. Select the wall face that intersects the space. That will be the new boundary. The "Link" dialog will reflect your selection.
4. Press the OK button in the "Link" dialog.
5. The wall face now defines a new boundary, and the space will only extend up to the wall face in the direction facing it.

Ограничения

• The boundaries properties is currently not editable via GUI.
• See the forum announcement.

Свойства

An Arch Space object shares the common properties and behaviors of all Arch Components.

Data

Space

View

Space

• ВидDecimals (Integer): The number of decimals to use for calculated texts.
• ВидFirst Line (Length): The size of the first line of text (multiplies the font size. 1 = same size, 2 = double size, etc..).
• ВидFont Name (Font): The name of the font.
• ВидFont Size (Length): The size of the text.
• ВидLine Spacing (Float): The space between the lines of text.
• ВидShow Unit (Bool): Show the unit suffix or not.
• ВидText (StringList): The text to show. Use $area, $label, $longname, $description or any other propery name preceded with $ (case insensitive), or $floor, $walls, $ceiling for finishes, to insert the respective data.
• ВидText Align (Enumeration): The justification of the text.
• ВидText Color (Color): The color of the text.
• ВидText Position (VectorDistance): The position of the text. Leave (0,0,0) for automatic position.

Опции

• To create zones that group several spaces, use an Arch BuildingPart and set its IFC type to "Spatial Zone".
• The Space object has the same display modes as other Arch and Part objects, with one more, called Footprint, that displays only the bottom face of the space.

Scripting

Space = makeSpace(objects=None, baseobj=None, name="Space")

• Creates a Space object from the given objects or baseobj, which can be
  • one document object, in which case it becomes the base shape of the Space object, or
  • a list of selection objects as returned by FreeCADGui.Selection.getSelectionEx(), or
  • a list of tuples (object, subobjectname)

Пример:

import FreeCAD, Arch

Box = FreeCAD.ActiveDocument.addObject("Part::Box", "Box")
Box.Length = 1000
Box.Width = 1000
Box.Height = 1000

Space = Arch.makeSpace(Box)
Space.ViewObject.LineWidth = 2
FreeCAD.ActiveDocument.recompute()

After a space object is created, selected faces can be added to it with the following code:

import FreeCAD, FreeCADGui, Draft, Arch

points = [FreeCAD.Vector(-500, 0, 0), FreeCAD.Vector(1000, 1000, 0)]
Line = Draft.makeWire(points)
Wall = Arch.makeWall(Line, width=150, height=2000)
FreeCAD.ActiveDocument.recompute()

# Select a face of the wall
selection = FreeCADGui.Selection.getSelectionEx()
Arch.addSpaceBoundaries(Space, selection)

Boundaries can also be removed, again by selecting the indicated faces:

selection = FreeCADGui.Selection.getSelectionEx()
Arch.removeSpaceBoundaries(Space, selection)

Плоскость Сечения

Лестница

Архитектурный верстак "Arch"

BIM

• 2D drafting: Sketch, Line, Polyline, Circle, Arc, Arc by 3 points, Fillet, Ellipse, Polygon, Rectangle, B-spline, Bézier curve, Cubic Bézier curve, Point

---

• 3D/BIM: Project, Site, Building, Level, Space, Wall, Curtain Wall, Column, Beam, Slab, Door, Window, Pipe, Pipe Connector, Stairs, Roof, Panel, Frame, Fence, Truss, Equipment
  • Reinforcement tools: Custom Rebar, Straight Rebar, U-Shape Rebar, L-Shape Rebar, Stirrup, Bent-Shape Rebar, Helical Rebar, Column Reinforcement, Beam Reinforcement, Slab Reinforcement, Footing Reinforcement
  • Generic 3D tools: Profile, Box, Shape builder..., Facebinder, Objects library, Component, External reference

---

• Annotation: Text, Shape from text, Aligned dimension, Horizontal dimension, Vertical dimension, Leader, Label, Axis, Axes System, Grid, Section Plane, Hatch, Page, View, Shape-based view

---

• Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid, Working Plane Top, Working Plane Front, Working Plane Side

---

• Modify: Move, Copy, Rotate, Clone, Create simple copy, Make compound, Offset, 2D Offset..., Trimex, Join, Split, Scale, Stretch, Draft to sketch, Upgrade, Downgrade, Add component, Remove component, Array, Path array, Polar array, Point array, Cut with plane, Mirror, Extrude..., Difference, Union, Intersection

---

• Manage: BIM Setup..., Views manager, Manage project..., Manage doors and windows..., Manage IFC elements..., Manage IFC quantities..., Manage IFC properties..., Manage classification..., Manage layers..., Material, Schedule, Preflight checks..., Annotation styles...

---

• Utils: Toggle bottom panels, Move to Trash, Working Plane View, Select group, Set slope, Create working plane proxy, Add to construction group, Split Mesh, Mesh to Shape, Select non-manifold meshes, Remove Shape from Arch, Close Holes, Merge Walls, Check, Toggle IFC Brep flag, Toggle subcomponents, Survey, IFC Diff, IFC explorer, Create IFC spreadsheet..., Image plane, Unclone, Rewire, Glue, Reextrude
  • Panel tools: Panel, Panel Cut, Panel Sheet, Nest
  • Structure tools: Structure, Structural System, Multiple Structures
  • IFC tools: IFC Diff..., IFC Expand, Make IFC project, IfcOpenShell update
  • Nudge: Nudge Switch, Nudge Up, Nudge Down, Nudge Left, Nudge Right, Nudge Rotate Left, Nudge Rotate Right, Nudge Extend, Nudge Shrink

---

• Additional: Preferences, Fine tuning, Import Export Preferences, IFC, DAE, OBJ, JSON, 3DS, SHP

Документация пользователя

• Начинающим
• Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
• Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования

---

• Помощь: Учебники, Видео учебники
• Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Менеджер дополнений, Внешние верстаки, Cкрипты и макросы

---

• Hubs: Уголок пользователя, Уголок опытных пользователей, Уголок разработчиков